Wireless mac address is dynamic
You can enter any name to be the WLAN SSID. Enter the WLAN ID and WLAN SSID information.From the controller GUI, choose WLANs > New in order to create a new WLAN.
#Wireless mac address is dynamic how to
This procedure explains how to configure the WLANs in the WLC. However, remember that the same VLAN ID must also exist in the RADIUS server for that particular VLAN to be assigned to the client. Similarly, you can configure several dynamic interfaces in your WLC. Now you are configured with a dynamic interface in your WLC. Refer to your DHCP server documentation for more information. In such cases, the primary DHCP server field points to the IP address of that device used as the DHCP server.
You can also use an external DHCP server, a router, or the RADIUS server itself as a DHCP server to the wireless clients. Note: Because this document uses an internal DHCP server on the controller, the primary DHCP server field of this window points to the Management Interface of the WLC itself. This takes you to the Edit window of this dynamic interface (VLAN 10 here).Įnter the IP Address and default Gateway of this dynamic interface From the controller GUI, under the Controller > Interfaces window, the dynamic interface is configured.
You can see the same dynamic interface (VLAN=10) configured in the WLC in this example. In the example, the user1 is specified with the Tunnel-Private-Group ID of 10 (VLAN =10) on the RADIUS server. As explained earlier in this document, the VLAN ID specified under the Tunnel-Private-Group ID attribute of the RADIUS server must also exist in the WLC. This procedure explains how to configure dynamic interfaces on the WLC. This Shared Secret key should be the same as the one configured in the RADIUS server under Network Configuration > AAA Clients > Add Entry.